Helicoidal rotor pump 02
Helicoidal rotor pump 02 designed for the transport of liquid with or without solids. This helicoidal rotor pump is able to suck from a depth of up to 6 meters below its own level. It can be reversed depending on the direction of the electric motor. The pump is directly attached to the shaft of the electric motor. Mounted on trolley with starter. Pump built in AISI 304 / EPDM. Male inlet/outlet. Maximum pressure for this pump is 4 Bar.
Optional:
– T-modification with double wall for cooling/heating.
– V-modification with double mechanical seal.
– Modification K mounted on a trolley.
– Modification B By-pass with safety valve.
– MR modification Geared motor.
– Modification Mv Variable speed drive.
– Construction in AISI 316.
– Connection: Garolla, SMS, Macon, Clamp, etc.
– Other options on request.
REFERENCE | PRODUCTION | POWER | RPM | FITTING | DIMENSIONS | WEIGHT |
PV301K |
1,000 litres/hour | 1.1 kW | 925 rpm | NW 50 | 1,000 x 400 x h. 775 mm | 28 kg |
PV301KA |
1,500 litres/hour | 1.1 kW | 1,420 rpm | NW 50 | 1,000 x 400 x h. 775 mm | 28 kg |
PV302K | 4,000 litres/hour | 1.5 kW | 920 rpm | NW 80 | 1,245 x 440 x h. 775 mm | 45 kg |