Double flanged butterfly valve, for flow regulation and sectioning in water supply and distribution networks, pumping, irrigation... It has minimum pressure loss due to the hydrodynamic design of the disc, it is 100% watertight and does not need gaskets for installation. Vulcanised seat that prevents contact between the fluid and the body, thus avoiding wear and corrosion. Bi-directional flow. Polished disc edges to prevent damage to the seat. No mounting gaskets required. Maximum working pressure: PN10/PN16. Working temperature between -10°C and 90°C. Body in ductile cast iron GJS-400-15. Disc in CF8M stainless steel. Shaft in stainless steel AISI 420. Bearings in bronze. EPDM vulcanized seat. Distance between faces: EN 558-1 series 13. Valve with lever handle up to DN300, manual reducer, single phase electric actuator up to DN600, three phase electric actuator, double or single acting pneumatic actuator up to DN600.
| REFERENCE | SIZE |
|---|---|
| 23D.050.1 | DN 50 |
| 23D.065.1 | DN 65 |
| 23D.080.1 | DN 80 |
| 23D.100.1 | DN 100 |
| 23D.125.1 | DN 125 |
| 23D.150.1 | DN 150 |
| 23D.200.1 | DN 200 |
| 23D.250.1 | DN 250 |
| 23D.300.1 | DN 300 |
| 23D.350.1 | DN 350 |
| 23D.400.1 | DN 400 |
| 23D.450.1 | DN 450 |
| 23D.500.1 | DN 500 |
| 23D.600.1 | DN 600 |
| 23D.700.1 | DN 700 |
| 23D.800.1 | DN 800 |
| 23D.900.1 | DN 900 |
| 23D.1000.1 | DN 1000 |
| 23D.1200.1 | DN 1200 |
| 23D.1400.1 | DN 1400 |
| 23D.1600.1 | DN 1600 |
| 23D.1800.1 | DN 1800 |
| 23D.2000.1 | DN 2000 |
Double flanged butterfly valve with centered shaft
Double flanged butterfly valve, for flow regulation and sectioning in water supply and distribution networks, pumping, irrigation... It has minimum pressure loss due to the hydrodynamic design of the disc, it is 100% watertight and does not need gaskets for installation. Vulcanised seat that prevents contact between the fluid and the body, thus avoiding wear and corrosion. Bi-directional flow. Polished disc edges to prevent damage to the seat. No mounting gaskets required. Maximum working pressure: PN10/PN16. Working temperature between -10°C and 90°C. Body in ductile cast iron GJS-400-15. Disc in CF8M stainless steel. Shaft in stainless steel AISI 420. Bearings in bronze. EPDM vulcanized seat. Distance between faces: EN 558-1 series 13. Valve with lever handle up to DN300, manual reducer, single phase electric actuator up to DN600, three phase electric actuator, double or single acting pneumatic actuator up to DN600.
| REFERENCE | SIZE |
|---|---|
| 23D.050.1 | DN 50 |
| 23D.065.1 | DN 65 |
| 23D.080.1 | DN 80 |
| 23D.100.1 | DN 100 |
| 23D.125.1 | DN 125 |
| 23D.150.1 | DN 150 |
| 23D.200.1 | DN 200 |
| 23D.250.1 | DN 250 |
| 23D.300.1 | DN 300 |
| 23D.350.1 | DN 350 |
| 23D.400.1 | DN 400 |
| 23D.450.1 | DN 450 |
| 23D.500.1 | DN 500 |
| 23D.600.1 | DN 600 |
| 23D.700.1 | DN 700 |
| 23D.800.1 | DN 800 |
| 23D.900.1 | DN 900 |
| 23D.1000.1 | DN 1000 |
| 23D.1200.1 | DN 1200 |
| 23D.1400.1 | DN 1400 |
| 23D.1600.1 | DN 1600 |
| 23D.1800.1 | DN 1800 |
| 23D.2000.1 | DN 2000 |
You might also like
