Expansion joint to absorb and eliminate noise and vibrations in fluid lines. Its design allows longitudinal, transverse and angled movement. Minimal pressure loss, 100% watertight and does not require gaskets for installation. Full bore. Bi-directional flow. Burst pressure over 60 bar. Working temperature between -10°C and 80°C. Design pressure: 10-16 bar. EPDM or NBR rubber.
| REFERENCE | SIZE |
|---|---|
| 41A.032 | DN 32 |
| 41A.040 | DN 40 |
| 41A.050 | DN 50 |
| 41A.065 | DN 65 |
| 41A.080 | DN 80 |
| 41A.100 | DN 100 |
| 41A.125 | DN 125 |
| 41A.150 | DN 150 |
| 41A.200 | DN 200 |
| 41A.250 | DN 250 |
| 41A.300 | DN 300 |
| 41A.350 | DN 350 |
| 41A.400 | DN 400 |
| 41A.450 | DN 450 |
| 41A.500 | DN 500 |
| 41A.600 | DN 600 |
| 41A.700 | DN 700 |
| 41A.800 | DN 800 |
| 41A.900 | DN 900 |
| 41A.1000 | DN 1000 |
| 41A.1200 | DN 1200 |
| 41A.1400 | DN 1400 |
Single wave expansion joint
Expansion joint to absorb and eliminate noise and vibrations in fluid lines. Its design allows longitudinal, transverse and angled movement. Minimal pressure loss, 100% watertight and does not require gaskets for installation. Full bore. Bi-directional flow. Burst pressure over 60 bar. Working temperature between -10°C and 80°C. Design pressure: 10-16 bar. EPDM or NBR rubber.
| REFERENCE | SIZE |
|---|---|
| 41A.032 | DN 32 |
| 41A.040 | DN 40 |
| 41A.050 | DN 50 |
| 41A.065 | DN 65 |
| 41A.080 | DN 80 |
| 41A.100 | DN 100 |
| 41A.125 | DN 125 |
| 41A.150 | DN 150 |
| 41A.200 | DN 200 |
| 41A.250 | DN 250 |
| 41A.300 | DN 300 |
| 41A.350 | DN 350 |
| 41A.400 | DN 400 |
| 41A.450 | DN 450 |
| 41A.500 | DN 500 |
| 41A.600 | DN 600 |
| 41A.700 | DN 700 |
| 41A.800 | DN 800 |
| 41A.900 | DN 900 |
| 41A.1000 | DN 1000 |
| 41A.1200 | DN 1200 |
| 41A.1400 | DN 1400 |
You might also like
